TOPIC:

Just entered Kirtland using US Military Camgrounds website for RV Gate (Eubanks Gate). RV Gate has apparently changed to the Truman Gate, on Gibson St, west side of base.
They let us in at Eubanks, but a very tight fit. Safe travels.

jimlamberson wrote:

Just entered Kirtland using US Military Camgrounds website for RV Gate (Eubanks Gate). RV Gate has apparently changed to the Truman Gate, on Gibson St, west side of base.
They let us in at Eubanks, but a very tight fit. Safe travels.

Thanks for the note. The website already states to use the Truman gate

Large Rigs should use the Truman Gate. ---- Truman Gate (open 24/7): Due to blocked roads, rigs now enter the campground from the end of the campground closest to the Eubank Gate which means the signs for the campground are not easily seen. Take I-25 Exit 222A East Gibson Blvd SE (From I-40 take I-25 South) In 2.8 miles turn right on Truman, Continue through Truman Gate, Continue Straight to T in road which is Randolph, Turn left on Randolph, Turn Left on Hardin, Hardin will become 20th St SE, Stay in left lane to go straight across Ave G at Stop Light (right two lanes will exit base through the Eubank Gate). Take First left into Campground. You will see the Storage Area first, then the newer area of the campground followed by the Campground Office in the older section of the Campground. There is a sign by the office but it is difficult to see when entering from the east end of the campground. Recommend Big Rigs park in the large gravel area in front of sites 80, 82 & 84 (see park map) and walk to office to register. ---- If less than 30' in length (total), you can use the Eubanks or Gibson gates. But these gates are still difficult to navigate in a RV.

Please let me know if this is wrong.